Samsung ML-4512ND-TAA 사용자 가이드

•

With a USB cable: You can simply set up a wireless network 
using the program on the supplied software CD. Only Windows 
and Macintosh operating systems are supported (see "Setup 
using Windows" on page 38 or "Setup using Macintosh" on page 
45).

 

You can also install a wireless network in Samsung Easy 
Printer Manager (Device Settings) or Printer Settings Utility 
with a USB cable after installing the driver (Windows and 
Macintosh operating systems are supported).

 

•

With a network cable: You can set up a wireless network using 
the SyncThru™ Web Service program (see "Using a network 
cable" on page 51).

16 

 

Some models may not support this feature.

 

If your machine and an access point (or wireless router) support Wi-
Fi Protected Setup™ (WPS), you can easily configure the wireless 
network settings on the control panel without a computer.

 

If you want to use the wireless network using the 
infrastructure mode, make sure that the network cable is 
disconnected from the machine. Using the WPS (PBC) 
button or entering the PIN from the computer to connect to 
the access point (or wireless router) varies depending on the 
access point (or wireless router) you are using. Refer to the 
user's guide of the access point (or wireless router) you are 
using.

 

•

Check if the access point (or wireless router) supports Wi-Fi 
Protected Setup™ (WPS).

•

Check if your machine supports Wi-Fi Protected Setup™ (WPS).

•

Networked computer (PIN mode only)

The Push Button Configuration (PBC) method allows you to 
connect your machine to a wireless network by pressing both the 
WPS menu on the control panel of your machine and the WPS (PBC) 
button on a Wi-Fi Protected Setup™ (WPS)-enabled access point (or 
wireless router) respectively.