Samsung C460FW 사용자 설명서
Wireless network setup
168
2. Using a Network-Connected Machine
7
Select Using a USB cable on the Select the Wireless Setup Method
screen. Then, click Next.
screen. Then, click Next.
8
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you want to use and click Next.
the name (SSID) of the access point you want to use and click Next.
If you cannot find the network name you want to choose, or if you want to
set the wireless configuration manually, click Advanced Setting.
set the wireless configuration manually, click Advanced Setting.
•
Enter the wireless Network Name: Enter the SSID of the access point
(SSID is case-sensitive).
(SSID is case-sensitive).
•
Operation Mode: Select Infrastructure.
•
Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on a WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre Shared Key pass phrase), which is manually
configured on the access point and each of its clients.
print server based on a WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre Shared Key pass phrase), which is manually
configured on the access point and each of its clients.
•
Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES,
TKIP AES).
TKIP AES).
•
Network Password: Enter the encryption network password value.
•
Confirm Network Password: Confirm the encryption network
password value.
password value.
•
WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
WEP Key Index.