Primera Technology 63504 사용자 설명서

Color + Black is best for images that have large areas of black

graphics or text. Although you can print these same images

with just the color cartridges, often the blacks will look darker

with this setting.  To make sure the black cartridge is used the

black areas of the source image must be 100% black.  If

SureThing or Disc Cover is used to create black text or graph-

ics you can be assured that the black areas are 100% black.

However, if you are using a JPG image, even areas that look

black may not use the black cartridge since the JPG format

compresses the image. 
Color Only is the default setting and is best for most images.

With this setting the printer only uses the color cartridges to

produce all colors including gray scale black and white

images. 
Monochrome Black is for images that have large black areas or

black text. This will ensure that no color ink is being used. 

This option controls the ink saturation of the printed image.

When printing onto the printer manufacturer's TuffCoat

media, this option can be left at its default setting of 100%.

When printing onto other brands of printable media, you may

need to adjust this control in order to optimize the ink satura-

tion for the printable surface of your specific media. Click on

the up and down arrows to change the ink saturation setting.

Lower numbers reduce the overall ink saturation, while higher 

numbers increase it. If discs do not seem to be drying 

completely it may be necessary to reduce this value.

Adjust this value to print all the way to the outer edge of a

disc.  This is useful if you are printing full coverage images.

The lower you set this value the farther to the outer edge of

the disc you will print.  Please note that with most media the

printable surface does not extend all the way to the edge of the

disc.  Because of this you will not normally set this value to

zero. You may also want to adjust the inner diameter setting.

To use the preset outer diameter setting for Primera media,

select the media type from the drop down box at the top of the

printer settings area.

511276.qxd  11/23/2010  10:44 AM  Page 37