Ricoh LDD280 사용자 설명서
Basic Procedure
47
2
F
Press the {Start} key.
Master making and printing starts.
-How to operate
❖ To stop the machine during a multi-
print run
Press the {Clear/Stop} key.
❖ To return the machine to the initial
condition after printing
Press the {Clear Modes} key.
❖ When clearing entered values
Press the {Clear/Stop} key or [Clear]
on the display.
on the display.
❖ To check the settings
Press the {Check Modes} key.
Original Beeper
The beeper sounds and an error mes-
sage is displayed if you leave origi-
nals on the exposure glass after
printing.
sage is displayed if you leave origi-
nals on the exposure glass after
printing.
Auto Reset
If not used for a certain period of time
after printing, the machine will return
to the initial condition. This function
is called “Auto Reset”.
after printing, the machine will return
to the initial condition. This function
is called “Auto Reset”.
Note
❒ You can change the time the ma-
chine waits before Auto Reset
starts. See p.155 “System Auto Re-
set Timer”.
starts. See p.155 “System Auto Re-
set Timer”.
❒ The machine will not enter Auto
Reset in the following cases if:
• a warning message appears
• there is no ink
• originals or paper are jammed
• it is making master or printing
• it is printing the second page of
• a warning message appears
• there is no ink
• originals or paper are jammed
• it is making master or printing
• it is printing the second page of
a combined print job
• it is loading original images into
memory
• you are making changes with
User Tools
• there is no paper
• there is no master
• the paper delivery box is full
• originals are left in the ADF
• a cover is open
• you select “Off” for “System Auto
• there is no master
• the paper delivery box is full
• originals are left in the ADF
• a cover is open
• you select “Off” for “System Auto
Reset Timer” with User Tools
AJK408S