Ricoh 8030e 사용자 설명서
When a Message Is Displayed
27
3
When a Message Is Displayed
This section describes the machine's main messages. If other messages appear,
follow their instructions.
follow their instructions.
Message
Cause
Solution
Put original
back, check it
and press
[Start].
Original jammed during Memo-
ry Transmission.
ry Transmission.
Place originals that have not been
scanned on the exposure glass or
ADF again.
scanned on the exposure glass or
ADF again.
Error occurred,
and transmis-
sion was can-
celled.
A document jam or an error oc-
curred during Immediate
Transmission. There may be a
problem with the machine or
the telephone line (for example
noise or cross talk).
curred during Immediate
Transmission. There may be a
problem with the machine or
the telephone line (for example
noise or cross talk).
Press [OK], and then resend the
pages that have not been sent. If the
error reoccurs frequently, contact
your service representative.
pages that have not been sent. If the
error reoccurs frequently, contact
your service representative.
Cannot detect
original size.
Place original
again, then
press [Start].
The machine failed to detect the
size of the original.
size of the original.
Place original again, and then press
the {Start} key.
the {Start} key.
L
Call Service
Functional
problems with
facsimile.
Please call ser-
vice.
There is a problem with the fax. Record the code number shown in
the display and contact your ser-
vice representative. Other func-
tions can be used.
vice representative. Other func-
tions can be used.
Memory is full.
Cannot scan
more. Transmit-
ting only
scanned pages.
The memory is full.
If you press [Exit], the machine re-
turns to standby mode and starts
transmitting the stored pages.
turns to standby mode and starts
transmitting the stored pages.
Check the pages that have not been
sent using the Communication Re-
sult Report, and then resend those
pages.
sent using the Communication Re-
sult Report, and then resend those
pages.
Remove the paper
from Internal
Tray 1.
The Internal Tray 1 is full.
Remove the paper. If the other tray
is also full, the tray name shown in
the display changes. Remove pa-
per from the tray indicated in the
display.
is also full, the tray name shown in
the display changes. Remove pa-
per from the tray indicated in the
display.