M-S Cash Drawer 7193 사용자 설명서
7193 Owner’s Guide
Commands
May 1996
Print Characteristics Commands
These commands control what the printed information looks like: selection of
character sets, definition of custom-defined characters, and setting of margins.
The commands are described in order of their Hex codes
character sets, definition of custom-defined characters, and setting of margins.
The commands are described in order of their Hex codes
Select Double-Wide Characters
Prints double-wide characters. The printer is reset to single-wide mode after a
line has been printed or a Clear Printer (10) command is received. It may be used
with single-wide characters on the same line, but not with Single and Double
Density Graphics modes.
line has been printed or a Clear Printer (10) command is received. It may be used
with single-wide characters on the same line, but not with Single and Double
Density Graphics modes.
Hex
Decimal
ASCII
12
18
DC2
Select Single-Wide Characters
Prints single-wide characters. It may be used with double-wide characters on the
same line, but not with Single and Double Density Graphics modes.
same line, but not with Single and Double Density Graphics modes.
Hex
Decimal
ASCII
13
19
DC3
Rotate Characters Counter-Clockwise
Rotates characters 90 degrees counter-clockwise. It remains in effect until the
printer is reset or until a Clear Printer (10), Set/Cancel Upside-Down Print (1B
7B)
printer is reset or until a Clear Printer (10), Set/Cancel Upside-Down Print (1B
7B)
, or Set/Cancel Rotated Print (1B 56) command is received. It is valid only at
the beginning of a line. It cannot be used with non-rotated print on the same line.
See “Summary of Rotated Printing” on page 78.
See “Summary of Rotated Printing” on page 78.
Hex
Decimal
ASCII
1B 12
27 18
ESC DC2