Lexmark Pro915 사용자 설명서
M
AKE
SURE
TO
ENTER
A
VALID
RECIPIENT
E
‑
MAIL
ADDRESS
M
AKE
SURE
THE
RECIPIENT
MAILBOX
IS
NOT
FULL
This causes e
‑mail to bounce back to your inbox.
Cannot attach files
S
ELECT
A
SUPPORTED
FILE
TYPE
(JPEG
OR
PDF)
M
AKE
SURE
THE
FILE
SIZE
IS
NOT
TOO
LARGE
Fax troubleshooting
Note: The fax function is available only in select printer models.
•
•
•
•
•
For detailed descriptions of common terms and tasks, see the following:
•
•
Fax troubleshooting checklist
If you encounter problems sending and receiving faxes, then check the connection first:
1
Check for a dial tone on the telephone line by plugging an analog telephone into the wall jack, DSL filter, VoIP device,
or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
or cable modem where you connected the printer. Make sure you plug the telephone into the same port.
If you do not hear a dial tone, then contact your line provider.
2
While the printer is connected to the telephone line, check for a dial tone by plugging an analog telephone into the
port of the printer.
If you do not hear a dial tone, then use the checklist below. Listen for a dial tone after checking each item.
If you hear a dial tone but still have problems sending and receiving faxes, then see the other topics in this section.
Connection checklist
•
Make sure that the printer and other devices on the line (if applicable) are set up and configured correctly according
to your setup scenario.
to your setup scenario.
•
Make sure that the cables are connected to the correct ports.
•
Make sure that the cables are securely plugged in.
Troubleshooting
158