Lexmark 90T9200 사용자 설명서
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
been saved.
Scanning to a network computer
1
Load the original document.
2
From the home screen, touch Scan > Computer.
3
Touch the name of the destination computer.
Notes:
•
Make sure the scan software is installed on the destination computer.
•
Make sure the printer can communicate with the destination computer.
•
You may be prompted to enter a PIN if the computer requires it.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
your operating system.
4
Select the output file type you want to create and other scan options. If necessary, touch Accept each time you
make a selection.
make a selection.
5
Press
.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
been saved.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write
‑protected.
1
Load the original document.
2
From the home screen, touch Scan > Memory Device.
3
Insert the flash drive or memory card.
Notes:
•
The printer reads only one memory device at a time.
•
If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears
on the display prompting you to select which memory device to use.
on the display prompting you to select which memory device to use.
4
Select the output file type you want to create.
5
Set the color, quality, original image size, and the other scan options. If necessary, touch Accept each time you
make a selection.
make a selection.
6
Press
, and then follow the instructions on the display.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
been saved.
Scanning
60