Konica Minolta 752 사용자 설명서
4-3.How To Operate Maintenance Mode
28 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6
(9) Select NEGA/POSI by touching [NEGA] or [POSI].
(10) Touch
on the upper part of the screen.
The print preference set screen (3/3) will appear.
(11) Touch the key on the right of the setting item, then
touch the numeric keys to set the following items.
MAX DENSITY : Sets the maximum density of an image.
MIN DENSITY : Sets the minimum density of an image.
Lo
: (Not used for the current version.)
La
: (Not used for the current version.)
SORTER
: Sets the bin in the sorter (option) into
which the film is discharged.
(12) Touch [STORE].
The confirm screen will appear.
If the tray is not selected, the screen for selecting the tray in
Step (2) will appear.
If the tray is not selected, the screen for selecting the tray in
Step (2) will appear.
(13) Touch [OK].
The print data in the SMPTE pattern will be queued, and the
maintenance menu screen will re-appear.
Touching [CONDITION SET UP] allows you to redo the print
preference settings. (Steps (4) through (12))
maintenance menu screen will re-appear.
Touching [CONDITION SET UP] allows you to redo the print
preference settings. (Steps (4) through (12))
(14) Touch [EXIT] to end the maintenance mode.
When the normal screen re-appears, the film in the selected
tray is transported and the SMPTE pattern is printed out. Wait
until printing is complete.
tray is transported and the SMPTE pattern is printed out. Wait
until printing is complete.
7
Does not perform the magnification
interpolation. But prints out in the
MAGNIFICATION setting. When
you wish to change this setting, ask
a service person.
interpolation. But prints out in the
MAGNIFICATION setting. When
you wish to change this setting, ask
a service person.