Savin 9922DP 사용자 설명서
What to do If Something Goes Wrong
104
3
F
Square the paper and set it in the
tray.
tray.
Important
❒ Do not stack paper over the lim-
it mark.
G
While pressing the release lever,
adjust the side fences to the new
paper size.
adjust the side fences to the new
paper size.
Important
❒ When setting small quantities of
copy paper, be careful not to
squeeze in the side fence too much
or paper will not be fed properly.
squeeze in the side fence too much
or paper will not be fed properly.
H
Lock the side lever.
I
While pressing the release lever,
adjust the back fence to the new
paper size.
adjust the back fence to the new
paper size.
J
Adjust the tray size with the pa-
per size selector to the new paper
size.
per size selector to the new paper
size.
Note
❒ If you cannot find your desired
paper size, select “p”, then set
the copy paper size with the “11
Special Pap. Size” setting in the
System Settings manual.
the copy paper size with the “11
Special Pap. Size” setting in the
System Settings manual.
K
Push the paper tray in until it
stops.
stops.