Intermec PF4i 사용자 설명서

When the printer is switched on, its behavior depends on the existence of 
a startup fi le (autoexec.bat) in its memory. There are two cases:

A  The printer is only fi tted with the Intermec Shell fi le-managing 

program, which allows the operator to choose between a variety of 
applications and functions.

B  In addition to Intermec Shell, the printer is also fi tted with a custom-

made application program that is design to perform a specifi c task, for 
example to print tickets, baggage tags, or product labels for a certain 
company. Such a program may be initiated by a startup fi le (autoexec.
bat) stored in the printer’s permanent memory or in a memory card.

There can be one startup fi le stored in each of three different parts of the 
printer’s memory. If there are startup fi les stored in more than one part, 
only one will be used with the following priority:

1. An autoexec.bat fi le stored in a memory card, provided the card was 

inserted in the printer before the power was switched on. 

2. An autoexec.bat fi le stored in the read/write part of the printer’s per-

manent memory (device "/c").

3. The pup.bat fi le (Intermec Shell) in the read-only part of the printer’s 

permanent memory (device "/rom").

Note: If you insert a CompactFlash memory card that contains 
a startup fi le before you switch on the printer, this startup fi le 
will be used instead of Intermec Shell.