Intermec PF4i 사용자 설명서

In addition to the media load procedure for tear-off (straight-through) 
operation described earlier in this chapter, the EasyCoder PF4i Compact 
Industrial can optionally be fi tted with a set of Quick-Load guides that 
makes media load much easier and quicker. 

The printer is normally delivered with two different sets of Quick-Load 
guides: wide and narrow. The wide type generally guides the media 
better, but the media must be at least 80 mm (3.15 inches) wide. The 
narrow type allows a media width as narrow as 40 mm (1.57 inches), but 
it may be less suited for wide and thin media. 

Quick-Load cannot be combined with peel-off (self-strip) operation.

An optional label taken sensor can hold the printing of the next copy 
in the batch until the present copy has been removed, see Chapter 9, 
“Options.”

Use the <Feed> key (see fi gure #5) when loading the same type of media. 
When switching to a new type of media, or if the printer does not feed 
out the media properly, simultaneously press the <Shift> and <Feed> 
keys to perform a “testfeed.” Fully automatic loading, without the opera-
tor having to press any key, requires a special set of Intermec Fingerprint 
instructions in the application program.