Intermec PF4i 사용자 설명서

The serial communication parameters control the communication 
between the printer and the connected computer or other devices on the 
standard serial port "uart1:" and the optional serial ports "uart2:" and 
"uart3:". The optional ports require an optional interface board. The 
printer’s fi rmware detects if an interface board is installed in the printer 
and presents additional sets of communication setup menus depending 
on type of communication (refer to diagrams 3-5 in Chapter 7, “Setup 
Mode”). 

Note: The serial communication parameters have no effect on 
parallel or EasyLAN communications, or on the IN and OUT 
ports on the optional Industrial Interface Board.

For the serial communication channel "uart1:", the following parameters 
can be set. Make sure they match the setup of the connected device or 
vice versa. If the setup of the printer and the setup of the host do not 
match, the response from the printer to host will be garbled.

The baud rate is the transmission speed in bits per second. There are 10 
options:

• 300
• 600
• 1200
• 2400
• 4800
• 9600 

 

(default)

• 19200
• 38400
• 57600
• 115200