Intermec PF4i 사용자 설명서

The Feedadjust part of the Setup Mode controls how much of the media 
is fed out or pulled back before and/or after the actual printing. These 
settings are global and will be effected regardless of which program is 
run.

Note: The fi rmware uses the front edges of labels w. gaps, the 
ends of detection slots, and the forward edges of black marks 
for detection, all seen in relation to the feed direction.

The Start Adjust value is given as a positive or negative number of dots. 
Default value is 0, which places the origin a certain distance back from 
the forward edge of the copy.

• A positive start adjustment means that the specifi ed length of media 

will be fed out before the printing starts. Thus, the origin is moved 
further back from the forward edge of the copy.

• A negative start adjustment means that the specifi ed length of media 

will be pulled back before the printing starts. Thus, the origin is 
moved towards the forward edge of the copy.

The Stop Adjust value is given as a positive or negative number of dots. 
Default value is 0, which stops the media feed in a position suitable for 
tear off operation.

• A positive stop adjustment means that the normal media feed after 

the printing is completed will be increased by the specifi ed value. 

• A negative stop adjustment means that the normal media feed after 

the printing is completed will be decreased by the specifi ed value.