Intermec PF4i 사용자 설명서

There are two ways to return to the factory default setup of the printer:

  Insert a special CompactFlash memory card and restart the printer.

  Using the printer’s built-in keyboard.

To reset the printer using the keyboard, do like this:

  Lift the printhead.

  Switch on the power to the printer and press the <i/F5> key and wait 

until the printer beeps.

  Swiftly press the following keys:

  <d/F4> t <c/F2> t <c/F2> t <e/F1>

  The following message will be displayed:

  Within 10 seconds, press <Enter> to reset the printer to factory 

default. The parameters will be reset and the printer will continue the 
normal startup.

  If you press <Esc/F2> or wait until the 10 seconds timeout has passed, 

the normal startup will continue without any reset being performed. 

Note:  If any of the fi les "card:NOSHELL.CFG", 
rom:NOSHELL.CFG", or "c:NOSHELL.CFG" exists in the 
printer’s memory, no reset to factory default will be performed.

The factory default will remove all fi les used to store settings. 
It will not reset settings that already has been read when the 
fi les are removed. This means that EasyLAN Wireless settings 
(SSID, keys, etc.) will retain their values from the previous 
start. However, the next reboot will reset them to factory 
default.