Intermec PF4i 사용자 설명서

As an alternative to selecting an application, you can step through a 
number of other useful facilities:

Set up the printer using its built-in keyboard, see Chapter 7, “Setup 
Mode.”

Produce a printout of the printer’s current setup values (test label “Setup 
Info”).

Feed out a number of label, ticket, tag, or portions of continuous stock 
while the printer auto-adjusts its media feed and label stop/black mark 
sensor. It is recommended to perform a Testfeed each time you load a roll 
of labels from a new batch or a different brand.

Print a series of four test labels (test labels “Diamonds”, “Chess”, “Bar 
Codes #1”, and “Bar Codes #2”) in order to test the printout quality and 
printhead alignment. The labels are presented in an infi nite loop, so you 
can print the series over and over again. Press <Enter> for each new label.

Reset all setup parameters to their default values, as listed in Chapter 6, 
“Setting Up the Printer.”

Using the Zmodem communication tool, fi les can be downloaded from 
a PC, either to be stored on a standard CompactFlash memory card or to 
upgrade the printer’s fi rmware. The following options are available:

•  Update CompactFlash card allows the printer to be used as a Com-

pactFlash card programming device. Any fi les can be downloaded 
from a PC to a standard CompactFlash card inserted in the memory 
card slot in the printer’s rear plate.

  A typical application is to create a fi rmware upgrade card from an 

upgrade fi le stored in a PC. You can use the card to upgrade the 
fi rmware in several printers simply by moving the card from printer 
to printer. Just insert the card, switch on the power, and wait from the 
prompts to appear in the printer’s display window.