IBM RS/6000 44P 사용자 설명서
If any of the addresses is incomplete or contains a number other than 0 to 255, an error
message displays when you select the Save icon. To clear this error, correct the
address and select Save again.
message displays when you select the Save icon. To clear this error, correct the
address and select Save again.
Attention:
If the client system and the server are on the same subnet, set the
gateway IP address to [0.0.0.0].
To change an address, press the backspace key on the highlighted address until the
old address is completely deleted. Then enter the new address.
old address is completely deleted. Then enter the new address.
Ping
The Ping icon allows you to confirm that a specified address is valid by sending a test
transmission to that address.
transmission to that address.
Client Addr
Remote IPL Setup
Exit
000.000.000.000
000.000.000.000
000.000.000.000
000.000.000.000
Gateway Addr
Server Addr
Subnet Mask
Save
255.255.255.000
88
44P Series Model 170 User’s Guide