IBM S544-5361-01 사용자 설명서
Chapter 8. Maintaining the Printer
8–3
Cleaning the Paper Path
This section tells you how to clean the paper path areas in the printer.
<2-1> CAUTION:
Switch off printer power and unplug the power cord from the power receptacle.
Cleaning the Paper Feeder Area
Paper dust may collect inside the paper feeder area and affect print quality.
Periodically wipe off the paper feeder area with a soft, clean cloth moistened
with water. After that, wipe any water residue off with a soft, clean, dry cloth. It
might help to use a small vacuum cleaner to do this. To open the paper
feeder, see “Clearing a Paper Jam in Area 3 (Paper Feeder Area)” on page
6–9.
Periodically wipe off the paper feeder area with a soft, clean cloth moistened
with water. After that, wipe any water residue off with a soft, clean, dry cloth. It
might help to use a small vacuum cleaner to do this. To open the paper
feeder, see “Clearing a Paper Jam in Area 3 (Paper Feeder Area)” on page
6–9.
Cleaning the Transfer Drum
Clean the surface of the transfer drum only when it is very dirty. Wipe the
surface gently with a lint-free cloth. Do not use water or solvents. Do not touch
the surface with your hand. Be careful not to spill solvents or oil on the
surface.
surface gently with a lint-free cloth. Do not use water or solvents. Do not touch
the surface with your hand. Be careful not to spill solvents or oil on the
surface.
To access the transfer drum, see “Clearing a Paper Jam in Area 1 (Transfer
Drum Area)” on page 6–4.
Drum Area)” on page 6–4.
Cleaning the Separation Corona Wire
When you replace the photoconductor drum cartridge or if you see toner spots
on your printouts, clean the separation corona wire using the procedure under
“Cleaning the Separation Corona Wire” on page 5–39.
on your printouts, clean the separation corona wire using the procedure under
“Cleaning the Separation Corona Wire” on page 5–39.