IBM 1116 사용자 설명서
Argecy Computer Corporation 248-324-1800
83
This light sequence in
advanced troubleshooting
mode:
advanced troubleshooting
mode:
Corresponds to this setting:
For entry and standard models, Parallel Mode 1 is set to On, the factory
default.
default.
This setting disables the pull-up resistors on the parallel port signals. It is
useful for computers that have open collector outputs on the parallel port
signals.
useful for computers that have open collector outputs on the parallel port
signals.
• Press the operator panel button with a double button press to scroll to
the next menu item, Parallel Mode 2.
• Turn off the printer to exit the advanced troubleshooting mode.
For entry and standard models, Parallel Mode 2 is set to On, the factory
default.
default.
This setting determines if the parallel port data is sampled on the leading
or trailing edge of strobe. If Parallel Mode 2 is set to On, the parallel port
data is sampled on the leading edge of strobe. The parallel port data is
sampled on the trailing edge of strobe if Parallel Mode 2 is set to Off.
or trailing edge of strobe. If Parallel Mode 2 is set to On, the parallel port
data is sampled on the leading edge of strobe. The parallel port data is
sampled on the trailing edge of strobe if Parallel Mode 2 is set to Off.
• Press the operator panel button with a brief button press to scroll
through the settings (On, Off). To turn off this setting, press the operator
panel button with a long button press to select and save the Off setting.
As the setting is saved, all operator panel lights remain on for
approximately 2 seconds
panel button with a long button press to select and save the Off setting.
As the setting is saved, all operator panel lights remain on for
approximately 2 seconds
• Press the operator panel button with a double button press to scroll to
the next menu item, Parallel Strobe Adjust.
Turn off the printer to exit the advanced troubleshooting mode.