Genicom PC4 사용자 설명서

Requirements

There are two methods to upgrade the printer’s firmware:

Using a PC

To upgrade the printer’s firmware via a cable connection from a PC run-

ning MS Windows, you will need the following:
•  The Intermec EasyCoder PC4 Config Tool. This is a free software 

running under Microsoft Windows

1

. It makes it possible to download 

various firmware version either directly to the printer or to a memory 

cartridge. It also supports font downloading and memory partition-

ing. The Config Tool supports seven languages and comes with a 

comprehensive on-line help in English.

•  An upgrading file (.ufz). The Intermec EasyCoder PC4 Config Tool 

comes with a collection of firmware upgrading files. New files can be 

downloaded from the Intermec Web site (

http://www.intermec.com

) 

and should be located in the subfolder “Firmware.” 

•  A host computer running Microsoft Windows with a parallel, USB, or 

RS-232 connection to the EasyCoder PC4. (Parallel or USB connec-

tions are recommended.)

•  Optionally a memory cartridge with 1 MB of Flash memory.

Using a Memory Cartridge

To upgrade the printer’s firmware using a memory cartridge, you will 

need the following:
•  A factory-programmed upgrading memory cartridge from Intermec 

(recommended if you cannot use MS Windows) or a upgrading 

memory cartridge created using the Intermec EasyCoder PC4 Config 

Tool. 

1

/. Supported versions of MS Windows: Windows 98, Windows Me, Windows 2000, 

and Windows XP.