Genicom microLaser 210 사용자 설명서
Mar 00
Genicom
Publication No. GEG-99054
microLaser 210 User Guide
6-7
Solving Duplexer Problems
If the printer is not operational after you have removed the duplexer, refer to Chapter 5:
Troubleshooting. After correcting the printer problem, return to “Installing the Duplexer”
on page 6-2 and reinstall the duplexer.
Troubleshooting. After correcting the printer problem, return to “Installing the Duplexer”
on page 6-2 and reinstall the duplexer.
Clearing Duplex Paper Jams
When an E7 error message is shown on the display screen, there is a paper jam in the duplexer. Use
the following procedure to clear a duplex paper jam:
the following procedure to clear a duplex paper jam:
1.
If you are using the paper tray in its extended position, remove the paper tray from the
printer.
printer.
2.
Squeeze the tabs on the rear of the printer and pull the rear cover toward you to open it.