Genicom microLaser 210 사용자 설명서
Mar 00
Genicom
Publication No. GEG-99054
microLaser 210 User Guide
9-15
Solving Offset Catch Tray Problems
Offset Catch Tray Makes Unusual Noises
The following characteristics define this offset catch tray problem:
■
The offset catch tray makes unusual noises or makes more noise than usual either while idle
or while printing.
or while printing.
■
The offset catch tray transports paper without a problem.
■
The control panel does not display an error code.
The following procedure guides you through multiple actions that may solve this offset catch tray
problem. Proceed one step at a time until the problem is solved—you may not need to complete
the entire procedure. If one of the steps in this procedure corrects the problem but the identical
problem returns in less than 50 prints, call for service.
problem. Proceed one step at a time until the problem is solved—you may not need to complete
the entire procedure. If one of the steps in this procedure corrects the problem but the identical
problem returns in less than 50 prints, call for service.
1.
Open the offset catch tray cover and inspect the inside for jammed paper or obviously dam-
aged parts.
aged parts.
Broken components or scraps of paper lodged inside the offset catch tray may be brushing
against moving parts and causing the noise.
against moving parts and causing the noise.
2.
Call your service technician.
This problem may be caused by a malfunctioning or broken component that requires service.
Offset Catch Tray will not Offset
The following characteristics define this offset catch tray problem:
■
The offset catch tray does not offset printed sheets.
■
The offset catch tray transports paper without a problem.
■
The control panel does not display an error code.
The following procedure guides you through multiple actions that may solve this offset catch tray
problem. Proceed one step at a time until the problem is solved—you may not need to complete
the entire procedure. If one of the steps in this procedure corrects the problem but the identical
problem returns in less than 50 prints, call for service.
problem. Proceed one step at a time until the problem is solved—you may not need to complete
the entire procedure. If one of the steps in this procedure corrects the problem but the identical
problem returns in less than 50 prints, call for service.
1.
Open the offset catch tray cover and inspect the inside for jammed paper or obviously dam-
aged parts.
aged parts.
Broken components or scraps of paper lodged inside the offset catch tray may be wedged
against moving parts, preventing the offset roll from moving.
against moving parts, preventing the offset roll from moving.
2.
Call your service technician.
This problem may be caused by a malfunctioning or broken component that requires service.