Genicom microLaser 210 사용자 설명서
Publication No. GEG-99054
Genicom
Mar 00
2-6
microLaser 210 User Guide
Connecting the Printer to the Host Computer
Connecting the Printer to the Host Computer
Most recent Intel systems will contain the needed components. However, there are a number
of older systems that, while having USB hardware, have an obsolete USB implementation.
Your GENICOM USB printer will not work with these older systems unless a separate USB
controller card is installed in your system. It is possible to have working hardware but not
have a physical port, in which case the proper connector must be purchased from the system
supplier.
of older systems that, while having USB hardware, have an obsolete USB implementation.
Your GENICOM USB printer will not work with these older systems unless a separate USB
controller card is installed in your system. It is possible to have working hardware but not
have a physical port, in which case the proper connector must be purchased from the system
supplier.
NOTE:
Systems made in 1996 and earlier probably do not support USB correctly on the motherboard;
systems made in 1997 may or may not properly support USB; and systems made since 1998
probably do support USB correctly.
systems made in 1997 may or may not properly support USB; and systems made since 1998
probably do support USB correctly.
■
Apple
The Apple iMac and G3/G4 systems come with working USB hardware and fully support
your GENICOM USB printer. Older PCI-based Macintosh systems may be upgraded with a
USB card. This configuration should work with the correct version of the operating system.
your GENICOM USB printer. Older PCI-based Macintosh systems may be upgraded with a
USB card. This configuration should work with the correct version of the operating system.
Installation for Windows
Use the following procedure to install USB for Windows:
1.
Verify that your system supports USB and has an available USB connector. If you do not have
an available connector, you may need to purchase a USB hub.
an available connector, you may need to purchase a USB hub.
NOTE:
You may use an unpowered USB hub, since the printer is considered a self-powered device and
will not draw power from the USB port.
will not draw power from the USB port.
2.
Power on the host system and the printer and allow the two syst3(w)6twoshb2(ho)-7oti1ysng.8(.)]TJ/F11 1 Tm0.886 0 0.161 sccn1.50ccn6483735 TD0.0065 T3(2.)Tj/F8 1 Tf0 0 0 scn1.5055 0 TD0.012 TcAch he USBScab52.6(4)37.7(B)(S-254(t3(oase)-249-9(b52o(pr)-754(t3()5(h)-252t4(t3().7(B)(S-2.8(p)52.6(.(r)3(P)55-6(n)51.8(tse)-24t.2(a)6)n6(ed)-232t.5(he)-23()5((t)0os3(P)55t.uld)-243I)3-23(.1(t)n)51d8(U)-6o4(e)3e6(w)-9t3(w3(n)6no(pr)-754(t)n)51m3(o))4.2.8(tse38)-7.6(w)3())3(P)55c)5T)6.4(h)-252ho(pr)-7s54(t)n)51.9(c)6to(pr)-7nne.9(c)6t-1(e)]TJ0 -1.0989 TD013012 Tct1(por6c)10ypru4eanst tabel.3(e)-251to;6(u)-22()5((t24.4(-)-12e6(w)3(v)4)37.r)6wu5(em)-4.k.3(e)-0.4(s)48.2(1s)-4.6(e515.5(y)35.1(ou5(f)5alwayt3(w)6t14.2.a.9P)55h(st)-205i4(s)48t(an)-252)8 rer(2(an)-10)5((t24.3(e)-251s5(o)5am5(he)-1.9P)55o(pr)25nne.9(c)32t4(t6tor)58)19.6(.)]TJETq1 i 112.3
n32.36 468.12 0.24 refQBT/F4 1 Tf9 0 0 9 112.3er
c9(t24i)B 63-12tc
d
63-12tt4297 ra29hd
e