Fujifilm 3000 사용자 설명서

CLEANING THE PRINTER

Wipe with a soft cloth moistened with water.
Wipe again with a soft, dry cloth.

Wipe with a soft, dry cloth.

Be careful not to damage the platen rubber.
Avoid wiping the platen rubber with alcohol or
other solvents.

If the shaft becomes dirty, the printer will
not function properly.  Wipe the shaft
carefully with a soft cloth.

When the thermal heads have cooled (at
least 2 minutes after the printer has been
switched off) wipe the heater element
vertically with a soft, dry cloth.

If the thermal heads are particularly dirty, apply
a small amount of  isopropyl alcohol to the
cloth.  (Never touch the print heads directly
with your hands.)

thermal heads

cutter base

platen rubber

shuttle shaft

paper feed roller

heater element

10

If one of the following problems occurs, clean the printer parts outlined below.

The paper does not feed properly

The printer makes a rattling or grating noise during printing 

Horizontal lines appear periodically on the printed image

Vertical lines appear on the printed image

The original is not scanned properly

Paper feed roller

Shuttle shaft

Thermal heads

Platen glass

Document feed rollers, platen roller,
document eject rollers