Zebra Technologies UMAN-QLP-001 사용자 설명서

QL Plus Series User Guide

“Bluetooth” is a worldwide standard for the exchange of 

data between two devices via radio frequencies. Bluetooth ra-
dios are relatively low powered to help prevent interference 
with other devices running at similar radio frequencies. This 
limits the range of a Bluetooth device to about 10 meters (32 
feet).  Both the printer and the device it communicates with 
must follow the Bluetooth standard.  Other than conditions 
specified elsewhere in this manual, only one of the radio op-
tions can be installed in the printer at one time and the anten-
na used for these transmitters must not be co-located or must 
not operate in conjunction with any other antenna.

 Each Bluetooth enabled QL Plus printer is identified by 

a unique Bluetooth Device Address (BDA) loaded into its 
QuickLink module when manufactured.   In order to exchange 
data, two Bluetooth enabled devices must establish a connec-
tion.  

Bluetooth software is always running in the background, 

ready to respond to connection requests.  One device (known 
as the master or the client) must request a connection with an-
other.  The second device (the slave or the server) then accepts 
or rejects the connection.   A Bluetooth enabled QL Plus print-
er will normally act as a slave creating a miniature network 
with the terminal sometimes referred to as a “piconet”.

For the most part, communications using the Bluetooth pro-

tocol are initiated and processed without any operator inter-
vention.

 QL 220 Plus and 420 Plus printers can be equipped with 

both a Bluetooth and an 802.11b radio, allowing communi-
cations with both Bluetooth enabled devices and a Wireless 
Local Area Network (WLAN) (see WLAN discussion following).

continued