Zebra Technologies P110I 사용자 설명서
980515-001 Rev. A
P110i User’s Manual
27
5
Cleaning
Cleaning System
SYour P110i Printer includes a simple cleaning system using Pre-Saturated Cleaning
Cards provided. The regular use of these cards will clean and maintain important parts of
your printer that cannot be reached: including Print Head, the Transport Rollers, and the
Magnetic Encoder Station (optional feature).
Cards provided. The regular use of these cards will clean and maintain important parts of
your printer that cannot be reached: including Print Head, the Transport Rollers, and the
Magnetic Encoder Station (optional feature).
When to Clean
After approximately 1000 color cards have been printed, the printer LCD will prompt
CLEAN PRINTER, or when print quality has been degraded.
CLEAN PRINTER, or when print quality has been degraded.
How to Clean
1.
Leave power on.
2.
Press and hold the Multi-Function Control Button for 5 seconds.
3.
When the cleaning cycle is initiated, the LCD message REMOVE RIBBON THEN
CLOSE LID will display.
CLOSE LID will display.
Caution • PROTECT YOUR FACTORY WARRANTY!
The recommended maintenance procedures must be performed to maintain your
factory warranty. Other than the recommended cleaning procedures described in
this manual, allow only Zebra authorized technicians to service the P110i Printer.
The recommended maintenance procedures must be performed to maintain your
factory warranty. Other than the recommended cleaning procedures described in
this manual, allow only Zebra authorized technicians to service the P110i Printer.
•
NEVER
loosen, tighten, adjust, or bend, etc. a part or cable inside the
printer.
•
NEVER
use a high pressure air compressor to remove particles in the
printer.