Zebra Technologies 3ULQWHUV 사용자 설명서

54

 Zebra 

XiIIIPlus Users Guide

Front Panel Controls

After you have installed the labels and ribbon and printed a configuration label, you 
can change your XiIIIPlus printer settings using the front panel controls. Basic 
information about using the front panel controls is included in this appendix. See 

, and 

 for detailed 

information on the printer menu and on solving printing problems.

After the Power-On Self Test (POST) is complete, the LCD shows 

35,17(55($'<. 

Press SETUP/EXIT to enter Setup Mode. Press either NEXT/SAVE or PREVIOUS 
to scroll to the parameter you wish to set.

Parameters are shown in the order displayed when pressing NEXT/SAVE. 
Throughout this process, press NEXT/SAVE to continue to the next parameter, or 
press PREVIOUS to return to the previous parameter in the cycle.

You can leave Setup Mode at any time by pressing SETUP/EXIT. The 

6$9( &+$1*(6display appears. Pressing the left or right black oval displays other 
choices and pressing NEXT/SAVE selects the displayed choice.

The five menu choices are described in the table below.

 Printers that are operating on an IP network can be quickly configured with 

the ZebraLink

™

 WebView (ZebraNet

®

PrintServer II required). For information, see 

ZebraNet Networking: PrintServer II Installation and User’s Guide.

If you need to restore the printer to its factory default settings, see 

.