Accton Technology EP3003 사용자 설명서

10

This section describes the checks and decisions to be made before proceeding with
configuration under NetWare

•

 NetWare 2.2, NetWare 3.1x or NetWare 4.x

•

 NetWare PCONSOLE V1.21 or higher in the file server

•

 NetWare Print Server V1.22 or higher (remote printer mode only)

•

 DOS 3.3 or higher on workstations.

•

 Hardware installation must be completed.

Two operating modes are possible -

Print Server and Remote Printer. Print Server

mode is faster and uses fewer resources than Remote Printer mode but occupies a
user login slot. Remote Printer mode does not use a login slot. Print Server mode
should be used if possible.

♦

 

 The Print Server emulates NetWare PSERVER. When activated, the device will
perform the following operations:

•

 Login to specified NetWare file server(s)

•

 Poll the specified print queues.

•

 If there are print jobs in the print queues, then the Print Server will send them

to the printer(s).

♦

 

 The Print Server emulates a NetWare Remote Printer. After the unit is activated,
it will perform the following operations:

•

 Connect to NetWare PSERVER

•

 Receive the print jobs sent by PSERVER

•

 Convert the packet format to a acceptable printer format, and send the data to

the printer.

The following two methods can be used to setup the Print Server in the NetWare
environment.

♦

 

 The QUICKSET program will configure the Print Server and the current Novell
server in a single operation.