Accton Technology EP3003 사용자 설명서
Troubleshooting
91
Printing - General
Problem
No. 1
No. 1
When using 10BaseT cabling, the Print Server unit does not
work.
work.
Solution
No. 2
No. 2
Check the Hub’s link LED for the port to which the Print Server is
connected. If it is off, there is a problem in the network cable. If using
10BaseT or 100BaseT, check the LED next to the connector. It
should be on if the network connection is OK.
connected. If it is off, there is a problem in the network cable. If using
10BaseT or 100BaseT, check the LED next to the connector. It
should be on if the network connection is OK.
Problem
No. 2
No. 2
A printing device connected to the a Print Server port cannot
print or prints garbage.
print or prints garbage.
Solution
No. 2
No. 2
Check the following:
•
Cable connection between Print Server and printer.
•
Serial port configuration, if a serial device.
•
Printer driver in the application program or Windows matches the
printer.
Problem
No. 3
No. 3
The Configuration button on the Printer Status screen in BiAdmin
is grayed out, even though my printer in bi-directional.
is grayed out, even though my printer in bi-directional.
Solution
No. 3
No. 3
The button is unavailable if the printer is busy. You must wait until
the printer is idle.
the printer is idle.