Apple 1800428-001B 사용자 설명서

Installing Fonts

QMS magicolor CX Reference Guide

2-42

After the option is installed, remove the card from the slot and place 
the printer back on line.

Removing Fonts 

Use the Administration/Disk Operations/Remove Option menu to re-
move optional fonts from your hard disk. You need the original font card 
containing the files, because the contents of the card is compared to 
the contents of the hard disk and the matching files are deleted from 
the hard disk.

Procedure

After you have accessed the Administration/Disk Operations menu, 
press the control panel keys in the order shown in the following table. 
The printer responds by displaying a status message in the message 
window (DSK refers to the hard disk number, and CAR0 and CAR1 
refer to the font or card number).

You may need to press the Next key one or more times to 

advance through the list of options.

Select

Selects the disk and accesses the card 
address from which the optional font is 
being installed.

INSTALL SOURCE

CAR#: 

x

Select

Prompts you to insert the font card in 
one of the card slots below the printer’s 
media cassette.

INSTALL OPTION

INSERT MEDIA

Begins reading data from the card and 
installing the appropriate files on the 
hard disk. This usually takes several 
minutes.

INSTALL OPTION

READING DATA...

Acknowledges completion of the 
installation process.

INSTALL OPTION

INSTALL COMPLETE

Menu

Exits from the Install Option menu and 
returns to the Disk Operations menu.

DISK OPERATIONS

INSTALL OPTION

Select

Accesses the Administration/Disk 
Operations/Remove Option menu.

DISK OPERATIONS

REMOVE OPTION