Lenovo 3693 사용자 설명서
6. Flex the retaining clips as shown to remove the hard disk drive from the bracket.
Figure 28. Removing the hard disk drive from the bracket
7. To install a new hard disk drive into the bracket, flex the bracket and align pin
1
, pin
2
, pin
4
, and pin
5
on the bracket with the corresponding holes in the hard disk drive.
Important: Do not touch the circuit board
3
on the bottom of the hard disk drive.
.
8. Connect the signal cable and the power cable to the new hard disk drive.
48
ThinkStation User Guide