Brother HS-5000 사용자 설명서

CHAPTER 4 CONTROL PANEL

4–3

English: CS3 User’s Guide, Chapter 4

The 

 button alternately turns the printer on-line and off-line.

If you press this button during printing, the printer immediately stops printing
and ejects the paper.  Pressing this button again prints the rest of the print data. If
you want to cancel printing, cancel the print job in your application first and then
reset the printer.

When the printer becomes off-line because of an error,  the printer can recover
from some errors and return to on-line by pressing this button.

When performing cleaning or resetting,  the printer must be set to off-line first.

The 

 button is valid only in the off-line mode.

The printer is reset and restored to the user default settings.

✒ Note
Remember that the 

 button clears data from the printer memory.

This button is valid only in the off-line mode.

If the 

 LED is on,  pressing the 

 button prints any data remaining

in the printer after turning the printer off-line.

When you select manual feed in your application,  the printer alerts you to load
paper in the manual feed slot by blinking the 

 LED.  Press this button to

start feeding the paper.

If a recoverable error occurs, press the 

 button to recover from the error

and return to the on-line state.