Brother HS-5000 사용자 설명서

USER’S GUIDE

4–6

English: CS3 User’s Guide, Chapter 4

The printer has the following Reset and Hex Dump print modes.

1. Keep the 

 button depressed until all four LEDs light.  Then, release

the button.

The printer enters the reset/hex dump mode.  The 

 LED blinks to

indicate that the first choice, User Reset, is selected.  See the table below.

2. Press the 

 button to select another choice.

Every time you press the button, the blinking LED changes to indicate
another choice.  See the table below.

3. Press the 

 button to perform the selected choice.

LED

Choice

Function

User Reset

The printer is restored to the user default
settings without clearing permanent fonts and
macros.

Factory Reset The printer is restored to the factory settings

and permanent fonts and macros are cleared.

Hex Dump
print

The printer can print data as hexadecimal
values, so that you can check data errors and
problems.  To exit from this mode,  press the
Reset button or turn the printer off.

4. The printer returns to the ready status after printing