Toshiba M30-35 사용자 설명서

The Optical Drive is connected to the system board. The connectors may be disconnected 
from the system board or may be damaged. Disassemble the computer following the steps 
described in Chapter 4, Replacement Procedures and perform the following checks: 

Check 1  Make sure the Optical Drive is firmly connected to the system board. 

 

If the connection is loose, reconnect firmly and repeat Procedure 1. If there is still 
an error, go to Check 2. 

Check 2  The Optical Drive may be defective or damaged. Replace the drive with a new 

one. If there is still an error, go to Check 3. 

Check 3  Replace the system board with a new one following the steps in Chapter 4, 

Replacement Procedures. 

 

2-45