Toshiba SATELLITE E105 사용자 설명서
4.8 Error! Style not defined.
4 Replacement Procedures
CN12
CN7
CN10
LCD FL cable
CCD
cable
MIC
cable
Wireless
Lan
antenna
M2 5x4 black flat head screw
.
TAPE
Cable
fillister
Cable
fillister
Figure 4-16 Removing the display assembly
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures 4-15, 4-16.
1. Place the display panel in the correct position.
2. Secure six M2.5x4 black flat head screws securing the LCD module to the button
cover.
3. Connect LCD/FL cable in to CN12, Microphone cable connector in to CN7 and
Camera cable connector in to CN10 on the system board.
4. Set the wireless antenna cable into the wireless LAN card.
5. Secure the display assembly with two M2.5x6 black flat head screws in the order
shown on the figure4-15.
NOTE: Route wireless LAN antenna in cable fillister and avoid be compressed by ODD
drive.
drive.
Satellite E100/E105/ Satellite ProE100/E105
Maintenance Manual 4-27