Toshiba SATELLITE E105 사용자 설명서
3.2 Quick Start
3 Diagnostic Programs
The error list of each test module is displayed at the lower right corner of the scr
It would d
een.
isplay the total error quantity found in the test, the most recent five error
codes and description would be shown here. Detailed error report could be viewed
er to select.
Pressing ESC key to interrupt the test, USER BREAK message box would be prompted
iagnostics Window for the user to select the following actions:
SKIP---- Stop the sub-item of current test item to go to the next item’s test;
ABORT----Stop the current test item to test the next module.
ABORT ALL---- Stop all the selected test items. User could use the hot key Ctrl+D
LL, the following
message box will prompt for his selecting.
with Logview.exe.
When pressing ESC key during the test process, a User Break Windows will be
popped up for the us
3. USER BREAK
out in the central of D
CONTINUE---- Continue the test;
to achieve the same operation. When the user calls ABORT A
4. Title Bar:
Title Bar located at the top of the window, it includes information as follows:
Program Name and Its Version: Service Diagnostic Ver1.10;
Test Module Name: Label the name and version of the test module. For example, in
er Build Date
the above screen, the name of the test module is ‘Memory Test
200
7.02.09’.
Status Bar: Located at the bottom of the screen as follows:
The status bar is used to indicate the current script setting and test status. It consists of
two lines that includes the information as follows:
two lines that includes the information as follows:
Satellite E100 Maintenance Manual
19