Toshiba A1 사용자 설명서
4.18 Fluorescent Lamp
4 Replacement Procedures
4.18.1 Replacing the TMD 14.1 Inch XGA Fluorescent Lamp
Replace the Toshiba 14.1-inch XGA fluorescent lamp according to the following procedures
and Figures 4-45 to 4-56.
and Figures 4-45 to 4-56.
4.18.1.1 Disassembling Fluorescent Lamp
Peeling off the tapes and insulation sheets
1. Flip the module over and place it on a flat surface that is free of foreign objects.
2. In the order (1), (2), and (3) shown in Figure 4-45, remove the tape for fixing the FL
tube cable, two pieces of tape on the bezel that are close to the FL tube, and the X-
PCB insulation sheet.
PCB insulation sheet.
CAUTION: (1) Be careful not to damage the TAB.
(2) Leave the insulation sheet on the bezel to allow the reuse of the sheet.
(2) Leave the insulation sheet on the bezel to allow the reuse of the sheet.
F9
402
製品ラベル
>PC -
GF13<
ＢＬ Ｓ／Ｎ ラベル
ＦＬ破棄ラベル
Ｃ
ＡＵＴＩＯＮラベル
3
2
2
1
Product label
CA
UTI
O
N
l
a
b
e
l
BL S/N label
Label (cautions for disposal of FL tubes)
Figure 4-45 Replacing 14 Inch TMD fluorescent lamp (1)
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
4-65