Toshiba A1 사용자 설명서

The computer’s HDD is formatted using the MS-DOS FORMAT program or the physical 
format program of the test program. To format the HDD, start with Check 1 below and 
perform the other steps as required. 

Refer to the MS-DOS Manual for the operation of MS-DOS. For the format by the test 
program, refer to the Chapter 3. 

Check 1  Format an 2.5” HDD using MS-DOS FORMAT command. Type as FORMAT 

C:/S/U.  

If the 2.5” HDD can not be formatted, perform Check 2. 

Check 2  Using the MS-DOS FDISK command, set the 2.5” HDD partition. If the partition 

is not set, go to Check 3. If it is set, format the 2.5” HDD using MS-DOS 
FORMAT command. 

Check 3  Using the Diagnostic Disk, format the 2.5” HDD with a format option (physical 

format). If the HDD is formatted, set the 2.5” HDD partition using MS-DOS 
FDISK command.  

If you cannot format the 2.5” HDD using the Tests and Diagnostic program, go to 
Procedure 4.