Toshiba 960-498 사용자 설명서
3 Tests and Diagnostics
3.10 Floppy Disk Test
3.10 Floppy Disk Test
CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove
the Diagnostics Disk and insert the work disk into the FDD because the
contents of the floppy disk will be erased.
contents of the floppy disk will be erased.
To execute the Floppy Disk Test, select
5
from the DIAGNOSTIC TEST MENU, press
Enter
and follow the directions displayed on the screen.
1. The following message will appear. Select the media mode and start track to be tested
and press
Enter.
Test start track (Enter:0/dd:00-79) ?
2. The Floppy Disk test contains five subtests that test the FDD.
The floppy disk test menu will appear after you select FDD test parameters.
FLOPPY DISK XXXXXXX
XXX DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C]
: key stop
SUB-TEST :
XX
PASS COUNT : XXXXX ERROR COUNT : XXXXX
WRITE DATA : XX READ DATA : XX
ADDRESS : XXXXXX STATUS :
XXX
SUB-TEST MENU :
01 - Sequential read
01 - Sequential read
02 - Sequential read/write
03 - Random address/data
04 - Write specified address
05 - Read specified address
99 - Exit to DIAGNOSTIC TEST MENU
QOSMIO F10 Maintenance Manual (960-498)
3-21