Toshiba 960-498 사용자 설명서
4 Replacement Procedures
4.4 Memory module
4.4 Memory
module
CAUTION: The power of the computer must be turned off when you remove the memory
module. Removing a memory module with the power on risks damaging the
module or the computer itself.
module or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module
To remove a memory module, confirm that the computer is in boot mode. Then perform the
following procedure (See Figure 4-6).
following procedure (See Figure 4-6).
1. Loose the screw fixing the memory slot cover.
2. Remove the memory slot cover.
3. Open the left and right latches and remove the memory module.
Memory module
(Slot A)
(Slot A)
Screw
Memory slot cover
Latches
Slot B
Figure 4-6 Removing the memory module
QOSMIO F10 Maintenance Manual (960-498)
4-15