Toshiba 960-498 사용자 설명서

The following describes the procedure for installing the display assembly (See Figure 4-14 to 
4-18). 

1.  Connect the wireless LAN antenna cables (Main (white cable) and Aux (black 

cable)) to the connectors on the wireless LAN board. 

2.  Install the wireless LAN cover and fix it with the following screw. Pass the wireless 

LAN cables inside the guide of the wireless LAN cover. 

• M2×4Z  BIND 

screw   x1 

3.  Install the display assembly on the base assembly. 

4.  Secure the display assembly with the following screws. 

• M2.5×6B   

FLAT BIND screw   

x2 

5.  Pass the wireless LAN antenna cables through the guide on the middle frame from the 

wireless LAN board side and fix them with the insulators. The excess part of the 
cables should be kept under the frame of upper side of the slot. 

6.  Connect the SJ board flat cable to the connector CN9550 on the sound board. 

7.  Connect the LCD harness to the connector PJ5600 on the system board. 

8.  Connect the touch pad cable to the CN3201 on the system board. 

9.  Install the harness cover from the display side and secure it with the following screw. 

• M2.5×10B 

 FLAT 

BIND 

screw   x1 

10. Secure the base assembly with the following screws.  

• M2.5×10B  

FLAT BIND screw   

 

x12 (“10” in the figure) 

• M2.5×10B  

FLAT BIND screw   

 

x2   (“10+L” in the figure) 

           (Locktight) 

• M2.5×4B   

FLAT BIND screw   

 

x1   (“4” in the figure)