Toshiba 960-498 사용자 설명서

The following describes the procedure for installing the battery latch (See Figure 4-34 and 4-
35). 

1.  Install the battery lock button. 

2.  Set the spring on the battery latch and install the battery latch on the battery latch 

assembly. Make sure the spring is not set over the stopper. 

3.  Install the battery assembly to the base assembly from the HDD side and secure it 

with the following screws. 

•   M2×4Z   

FLAT BIND screw  x2 

4.  Slide the battery lock to the battery side. 

5.  Make sure the battery latch works smoothly by sliding it from the bottom side.