Epson 10020 사용자 설명서
Using the Serial Interface
If you have a printer, modem, mouse, or any other peripheral
with a serial interface, you can connect it to the serial
with a serial interface, you can connect it to the serial
(RS-232C) port on the back of the computer. The Apex uses a
25-pin male connector, so be sure you have the proper cable. If
you are not sure, check with the store where you bought the
computer and printer.
computer and printer.
To connect a serial device, follow the same steps outlined
above for a parallel device, but connect the cable to the serial
port.
port.
Setting up the serial port for a printer
If you are using a serial printer but your software does not
support a serial printer, you must do two things before you can
use the serial printer:
Set up the data transmission parameters for the port
Tell the computer to redirect printer data from the parallel
port to the serial port.
port to the serial port.
Setting Up Your System
1-9