IBM 2194 사용자 설명서

IBM Personal Computer User Guide

Adding and removing adapter cards

The system board includes three PCI adapter card connectors. 

Your computer provides expansion slots for PCI adapter cards only.

Follow these steps to install an adapter card:

1. Remove the screw that secures the expansion-slot cover. Then, remove the 

expansion slot cover.

2. Align and insert the adapter card into the adapter card connector.

3. Secure the card with the screw that you removed in step 1.

4. If your card has cables, connect the cable or cables from the adapter card to 

the correct connection on the system board or CD-ROM drive.

5. Reinstall all hardware (except for the expansion-slot cover, which cannot be 

reinstalled) and screws that you removed prior to the installation of the 
adapter card.

Note:

Make sure that you have followed the proper 
procedure in “Opening the system unit” on page 7-5. 
This ensures that you discharge the static electricity 
that you may have accumulated.