Aspire Digital 3810TZG 사용자 설명서

Chapter 1

Restore

The restore feature allows you to restore or recover the system from a factory default image or from previously 
created CD and DVD backups. You can also reinstall applications and drivers for your Acer system.

1. Click on Start, All Programs, Acer, Acer eRecovery Management.

2. Switch to the Restore page by clicking Restore.

3. You can choose to restore the system from a factory default image or reinstall applications and drivers.

4. Follow the instructions on screen to complete the process.

Restore Windows Vista from backup discs

To restore Windows Vista from your previously burned backup discs, you will need to insert the first backup 
disc and enable the F12 Boot Menu via the BIOS Setup Utility.

1. Turn on your computer and insert the first system recovery disc into the optical disc drive. Restart your 

computer.

2. During startup when the Acer logo shows, press the F2 key to enter BIOS Setup, where you can set 

system parameters.

3. Use the left and right arrow keys to select the Main submenu.

4. Use the up and down arrow keys to select F12 Boot Menu.

5. Use the F5 or F6 key to change F12 Boot Menu to Enabled.

6. Press the ESC key to enter the Exit submenu, press the ENTER key to Exit Saving Changes. Press the 

ENTER key again to select Yes. The system will reboot.

7. After rebooting, when the Acer logo shows, press the F12 key to open the Boot Menu. Here you can 

select which device to boot from.

8. Use the arrow keys to select the IDE CD, then press the ENTER key. Windows will be installed from the 

recovery disc.

9. Insert the second recovery disc when prompted, then follow the onscreen prompts to complete the 

restore.

10. Remove the recovery disc from the optical drive once the restore is complete. Do this before rebooting 

your computer.

This feature is only available on certain models.