Acnodes PC 8150 사용자 설명서

Appendix

PC 8150 User’s Manual

Onboard FDC Controller
Select Enabled if your system has a floppy disk controller
(FDC) installed on the system board and you wish to use it.
If you install and-in FDC or the system has no floppy drive,
select Disabled in this field. The options available are
Enabled, Disabled.

Onboard Serial Port 1 / 2 /3

Select an address and corresponding interrupt for the serial
port. Options: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,
Disabled, Auto.

Onboard Paralellel Port
This item allows you to determine access onboard parallel
port controller with which I/O address. The options
available are 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7, Disabled.

Parallel Port Mode
Select an operating mode for the onboard parallel (printer)
port. Select Normal unless your hardware and software
require one of the other modes offered in this field. The
options available are EPP1.9, ECP, SPP, ECPEPP1.7,
EPP1.7.

EPP Mode Select
Select EPP port type 1.7 or 1.9.

ECP Mode Use DMA
Select a DMA channel for the parallel port for use during
ECP mode.

PWRON After PWR-Fail

This item enables your computer to automatically restart or
return to its operating status.