Acer R700 사용자 설명서
97
Server Board Jumpers
Label
Jumper Name
What it does at system reset
A
RJ-45 Serial Port
Config
Config
Configures either a DSR or a DCD signal to
the connector. See “RJ-45 Serial Port” on
page 15.
the connector. See “RJ-45 Serial Port” on
page 15.
B
CMOS CLR
If these pins are jumpered, the CMOS
settings are cleared. These pins should not
be jumpered for normal operation.
settings are cleared. These pins should not
be jumpered for normal operation.
C
PSWD CLR
If these pins are jumpered, the password is
cleared. These pins should not be
jumpered for normal operation.
cleared. These pins should not be
jumpered for normal operation.
BS811.f/cppl!!Qbhf!:8!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN