Emerson ATCA-S201 사용자 설명서
RTM-ATCA-SXXX Overview
6806800H62B
ATCA‐S201 Installation and Use Guide
108
Table 41 Connector Port Identification and Location
1
1
AMC Slot 0
7
Zone 3, J32 RTM signal connector
2
AMC Slot 1
8
Zone 3, J33 RTM signal connector
3
AMC Slot 2
9
Zone 2, J23 Chassis connector
4
AMC Slot 3
10
Zone 1, J10 Power supply connector
5
SODIMM, DDR2 socket
11
Power supply mezzanine module
6
Zone 3, J30 RTM power connector
Figure 31 ATCA-S201 ATCA Module Connectors
10.2.1 AMC Module Slots
The ATCA-S201 can accept up to four mid-height single width AMC modules. Each
slot is routed with PCI Express (AMC.1) and storage (AMC.3) signaling.
AMC.1 SAS/SATA
Channel 2 of the AMC slots is allocated for SAS signaling. All four AMC are connected
to the SAS Controller located on the ATCA carrier.
to the SAS Controller located on the ATCA carrier.
Channel 3 of the AMC slots is allocated for SAS signaling. A manufacturing option is
available to provide ONE of the following configurations:
Port 3 is routed to the on board SAS Controller.
Port 3 is routed to the Zone 3 RTM connector.