Emerson ATCA-S201 사용자 설명서

RTM-ATCA-SXXX Overview 

6806800H62B 

ATCA‐S201 Installation and Use Guide 

 

35 

4.1  Enable HTML browser access 

The web browser configuration tool may be enabled or disabled for security reasons. 

 

Table 10 CLI command syntax, enable/disable GUI access 

Convention  

atca_blade set_gui <enable> + 

< enable>  0|1   

Value 0 disables the GUI, value 1  enables the GUI. 

4.2  HTML Security certificates (https:// ) 

The user may perform HTML configuration with any browser that supports https .  

Direct your browser to the any active IP port on the ATCA-S201.  The ATCA-S201 

employs https (encrypted secure sockets layer- SSL) technology to protect 
configuration activity that occurs over IP links.  The ATCA-S201 issues a self-signed 

certificate, identified as “EMERSON”. This certificate is not registered with a 

certificate authority, and the browser will pop up a warning as shown below.   Users 

must accept the certificate to proceed. 
 

 

4.3  HTML login screen 

A user login is required to access and operate the ATCA-S201 storage blade.  This 
menu prompts the user for username and password.  When shipped from the 

factory, the default entries are username=admin, password=admin.  See section 

3.2.1for the information on the Password change procedure. 
    

Username:

Password:

Submit

 



