Samsung SER-6500 사용자 설명서

                                                                                                                                                                                

SAMSUNG SER6500/40 PROGRAMMING & OPERATING MANUAL

117

Key lock position: REG mode

Two different check entry systems are available. One is Soft check system and the other is Hard check system. It
depends on the check type on the all clear procedure.

Soft check: In this mode, the balance due and the details of the order are stored in the check memory. Check

contents will be printed while you finish the transaction with payment. Or you can print the bill using
the 

key.

Hard check: In this mode, only the previous balance is stored in the check memory. The bill contents will be printed

whenever you make the check serve operation so you can have the whole bill after payment.

The 

key does nothing in this mode.

For a new guest, open a new check and assign a check number.
And then finalising the transaction temporarily using

key.

For an existing guest, enter the check number and press

 key. The previous balance will be displayed.

Make a sale and end the transaction temporary use

 key or finish the transaction completely by the

payment (See the previous section).

In the soft check mode use 

key while the check is opened, or enters the check number and press

key. The printing port is defined in the 

key status in the soft check mode. The full details

of the check will be printed everytime

In the soft check mode the 

key prints only details that have not already been printed.  Insert the Bill into

the slip printer. Enter the check number and press the 

key, the slip printer will print any details that have

not already been printed.  The next time you want to print details on this check reinsert the SAME bill, enter the
check number and press the 

key.  The printer will feed one line below the previous details and print any

details that has not already been printed.

In the hard check mode use bill contents are printed whenever you end the transaction temporary using 

key. The printing port is defined in the 

key status in the hard check mode.

CHECK#